Order by: Relevance
Price: Low to High, High to Low

 
Image of TREND 462X14TC TRIMMING CUTTER 191 MM DIAMETER
 

TREND 462X14TC TRIMMING CUTTER 191 MM DIAMETER

TREND 462X14TC TRIMMING CUTTER 191 MM DIAMETER Selfguiding trimmers with bearings mounted on end of cutter For trimming plastic or plywood overlay For copy profiling use the bearing to follow a template or base edge of board An approximate 3mm overlap...


 
Image of TREND 4682X12TC TRIMMING CUTTER 127 MM DIAMETER
 

TREND 4682X12TC TRIMMING CUTTER 127 MM DIAMETER

TREND 4682X12TC TRIMMING CUTTER 127 MM DIAMETER Selfguiding triple flute cutter Extra fine trimming and longer life For trimming of laminate or plywood overlay etc Ref 4682 has twin bearings for stability by increasing the bearing surface and is an industrial...


 
Image of TREND 4684X12TC TRIMMING CUTTER 127 MM DIAMETER
 

TREND 4684X12TC TRIMMING CUTTER 127 MM DIAMETER

TREND 4684X12TC TRIMMING CUTTER 127 MM DIAMETER Selfguiding triple flute cutter Extra fine trimming and longer life For trimming of laminate or plywood overlay etc A 2mm maximum overlap should be left before trimming


 
Image of TREND 46903X14TC GUIDED PROFILER 95MM DIAMETER X 25MM CUT
 

TREND 46903X14TC GUIDED PROFILER 95MM DIAMETER X 25MM CUT

TREND 46903X14TC GUIDED PROFILER 95MM DIAMETER X 25MM CUT Profiler with shank mounted bearing guides For use with router mounted above or below a table when following a template For profiling and rebating applications only Not for plunge cuttinggrooving...


 
Image of TREND 46911X14TC GUIDED PROFILER 127MM DIAMETER X 635MM CUT
 

TREND 46911X14TC GUIDED PROFILER 127MM DIAMETER X 635MM CUT

TREND 46911X14TC GUIDED PROFILER 127MM DIAMETER X 635MM CUT Profiler with shank mounted bearing guides For use with router mounted above or below a table when following a template For profiling and rebating applications only Not for plunge cuttinggrooving...


 
Image of TREND 477X14TC COMBI TRIMMER CUTTER 127 MM DIAMETER C19 C24MM LENGTH
 

TREND 477X14TC COMBI TRIMMER CUTTER 127 MM DIAMETER C19 C24MM LENGTH

TREND 477X14TC COMBI TRIMMER CUTTER 127 MM DIAMETER C19 C24MM LENGTH For trimming top & lip Economical cutters perform 3 functions 1 To top trim the overlay at 90 degrees 2 To trim the overlay at 45 degrees or 60 degrees 3 The base of the cutter can...