Order by: Relevance
Price: Low to High, High to Low

 
Image of FESTOOL 492183 KRD240OF1400 COPY RING 24MM
 

FESTOOL 492183 KRD240OF1400 COPY RING 24MM

FESTOOL 492183 KRD240OF1400 COPY RING 24MM Copying ring for gauging routing templates inserted in router without using tools Dia 2100 mm D 2400 mm


 
Image of MAKITA 1955622 DRT50 OFFSET BASE
 

MAKITA 1955622 DRT50 OFFSET BASE

MAKITA 1955622 DRT50 OFFSET BASE With this offset base you are able to trim close to wall and tight corners with a bit set in offset position Distance 185mm from the edge to the center of the bit Ideal for counter tops kitchen and bath sink cut outs


 
Image of MAKITA 1989853 DRT50 TILTING BEVEL BASE
 

MAKITA 1989853 DRT50 TILTING BEVEL BASE

MAKITA 1989853 DRT50 TILTING BEVEL BASE 30° 45° Tilt Capacity Suits both RT0700C DRT50Z


 
Image of TREND EBPC3 EASIBOLT CONNECTING BOLT 3 PACK
 

TREND EBPC3 EASIBOLT CONNECTING BOLT 3 PACK

TREND EBPC3 EASIBOLT CONNECTING BOLT 3 PACKPanel bolt connectors with Easibolt clips to connect a worktop joint togetherThe Easibolt clip will keep the metal worktop bolt in place on the underside of the worktop and leave both hands free for tightening...


 
Image of TREND PC10M WORKTOP CONNECTOR PACK OF 10
 

TREND PC10M WORKTOP CONNECTOR PACK OF 10

TREND PC10M WORKTOP CONNECTOR PACK OF 10 Panel bolt connectors to connect worktop joint together Pack of 10 Metal ended worktop connectors Requires 10mm AF spanner to tighten Ideal for kitchen fitters Total length 150mm


 
Image of TREND PHDRILL95 POCKET HOLE JIG DRILL 95MM 38
 

TREND PHDRILL95 POCKET HOLE JIG DRILL 95MM 38

TREND PHDRILL95 POCKET HOLE JIG DRILL 95MM 38 Replacement pocket hole jig stepped drill bit High Speed Steel


 
Image of Trend PHDRILL95Q POCKET HOLE DRILL 95MM WITH QR SHANK
 

Trend PHDRILL95Q POCKET HOLE DRILL 95MM WITH QR SHANK

Trend PHDRILL95Q POCKET HOLE DRILL 95MM WITH QR SHANK A 95mm diameter stepped High Speed Steel drill for use with Pocket Hole Jigs Supplied with depth setting collar Can be fitted to the Quick Chuck or directly into the drill chuck


 
Image of TREND RESIN100 RESIN CLEANER 100ML
 

TREND RESIN100 RESIN CLEANER 100ML

TREND RESIN CLEANER 100ML Ideal for Sawblades router bits planer blades and drill bits 100ml pump action dispenser


 
Image of TREND RUST60 SPRAY PROTECTORDISPENSER 60ML
 

TREND RUST60 SPRAY PROTECTORDISPENSER 60ML

TREND SPRAY PROTECTORDISPENSER 60ML Cleans thoroughly to penetrate and loosen rusted components Penetrating and lubricates to stop squeaking Drives out water on metal surfaces Frees sticky mechanisms unjams and lubricates Ideal for spraying onto router...


 
Image of TREND TRENDICOTE60 60ML CAN PTFE SPRAY
 

TREND TRENDICOTE60 60ML CAN PTFE SPRAY

TREND TRENDICOTE 60ML CAN PTFE SPRAY Invaluable for preventing buildup of resins on metal table surfaces sawblades and metal tooling Does not contain silicone Not for use on router plunge columns Size 60 ml Aerosol UN1950


 
Image of TREND TRENDICOTE DRY LUBRICANT PTFE SPRAY 500ML
 

TREND TRENDICOTE DRY LUBRICANT PTFE SPRAY 500ML

TREND TRENDICOTE DRY LUBRICANT PTFE SPRAY 500ML Invaluable for preventing buildup of resins on metal table surfaces sawblades and metal tooling Does not contain silicone Not for use on router plunge columns Size 500 ml Aerosol UN1950


 
Image of TREND TRENDIWAX LUBRICANT WAX STICK
 

TREND TRENDIWAX LUBRICANT WAX STICK

TREND LUBRICANT WAX STICK Used to extend saw life by keeping blade cool at cutting points For use when sawing aluminium