Order by: Relevance
Price: Low to High, High to Low

 
Image of Claber 1/2 inch-1/2 inch Threaded Extension 5Pcs
 

Claber 1/2 inch-1/2 inch Threaded Extension 5Pcs

The Claber 1/2 inch- 1/2 inch Threaded Extension has been designed to fit sprinklers to polyethylene tubes (with compression connectors). Simple to use, the Threaded Extension can easily be cut to the height needed. 5 piece pack.


 
Image of Claber 180 degree Pop-Up Sprinkler 2 inch
 

Claber 180 degree Pop-Up Sprinkler 2 inch

The Claber 2 inch 180 degree underground Pop-Up Sprinkler is perfect for watering vegetable patches and small gardens. The sprinkler nozzle has a specially designed profile to ensure uniform and balanced water distribution and works well with even low...


 
Image of Claber 180 degree Pop-Up Sprinkler 4 inch
 

Claber 180 degree Pop-Up Sprinkler 4 inch

The Claber 4 inch 180 degree underground Pop-Up Sprinkler is perfect for watering vegetable patches and small gardens. The sprinkler nozzle has a specially designed profile to ensure uniform and balanced water distribution and works well with even low...


 
Image of Claber 180 degree Spray Head. 1 Pc.
 

Claber 180 degree Spray Head. 1 Pc.

Claber 180 degree Spray Head. 1 Pc.


 
Image of Claber 1" Female - 1" Male Connector
 

Claber 1" Female - 1" Male Connector

From the Claber range, a solution for all your underground irrigation needs. This component is used to connect a solenoid valve in line.


 
Image of Claber 1" Female 24 V. Solenoid Valve (Wired)
 

Claber 1" Female 24 V. Solenoid Valve (Wired)

Resulting from Claber research and experience, a highly technological, 100% reliable solenoid valve. Made with resistant, perfectly watertight materials, tested at the highest pressures for domestic applications (up to 12 bar), but ideal even for lower...


 
Image of Claber 1 inch Bracket Coupling 2 Pcs.
 

Claber 1 inch Bracket Coupling 2 Pcs.

Claber 1 inch Bracket Coupling 2 Pcs.


 
Image of Claber 1 inch Connector Female 3/4 inch Thread
 

Claber 1 inch Connector Female 3/4 inch Thread

The Claber 1 inch connector Female 3/4 inch thread has been designed to connect a polyethylene tube to a 3/4 inch threaded tap or solenoid valve with a male 3/4inch thread. This will allow branching off a 1/2 inch polyethylene tube with 3/4inch threaded...


 
Image of Claber 1 inch Coupling
 

Claber 1 inch Coupling

For connecting two polyethylene tubes or repairing a punctured tube. freeze-proof and weather resistant perfectly watertight easy to install


 
Image of Claber 1 inch Coupling 1 inch Thread
 

Claber 1 inch Coupling 1 inch Thread

Claber 1 inch Coupling 1 inch Thread


 
Image of Claber 1 inch Elbow Connector
 

Claber 1 inch Elbow Connector

For joining two polyethylene tubes at right angles. freeze-proof and weather resistant perfectly watertight easy to install


 
Image of Claber 1 inch Elbow With Female 3/4 inch
 

Claber 1 inch Elbow With Female 3/4 inch

For installation on main polyethylene tube after cutting and joining two tube sections. Used with 3/4 threaded extension (cod. 90756 - 90765). freeze-proof and weather resistant perfectly watertight easy to install